Saniquats is a high‑performance commercial cleaning solution designed for reliable results in demanding environments. Formulated for professional use, it delivers effective cleaning action across a wide range of surfaces and applications. This product supports routine maintenance as well as intensive cleaning tasks, providing consistent performance, ease of use, and dependable results. Its versatility makes it suitable for industrial, commercial, and facility‑care settings, helping users maintain clean, safe, and well‑presented surfaces. Developed with efficiency and practicality in mind, Saniquats ensures optimal outcomes with minimal effort, making it an essential choice for organisations seeking professional‑grade cleaning performance.
Product & Company Identification
Product Name: Saniquats
Recommended use: Disinfectant/Cleaner
Company Details:
Envirochem International (NZ) Ltd
41 Angle Street, Onehunga
Auckland, New Zealand
Telephone: +64 9 262 0800
Emergency Telephone: National Poison Information Centre 0800 764 766
Date of Preparation: 01/06/2017
Hazard Identification
Not considered hazardous in accordance to the HSNO act 1996
Composition / Information on Ingredients
| Ingredient | CAS # | Concentration % |
|---|---|---|
| Quaternary Ammonium Chloride | 63449-41-2 | <10 |
| Surfactant | - | <10 |
| Other Ingredient (Non-Hazardous) | - | Balance |
First Aid Measures
Ingestion: Immediately rinse mouth with water. If swallowed do not induce vomiting. Give water to drink. Never give anything by mouth to an unconscious person. Seek immediate medical aid immediately.
Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes while holding eyelids open. Transport to the nearest medical facility for additional treatment. Do not rub eyes or keep eyes closed.
Skin Contact: Remove contaminated clothing. Flush exposed area with water and wash with soap if available.
Inhalation: Move person to ventilated area. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention.
Fire Fighting Measures
Extinguishing Media: Use dry chemical powder, foam, polymer foam, water spray or fog. Water may be ineffective, but spray can cool and control heat.
Hazards from Combustion: Evaporation of aqueous component; residual material can burn if ignited. Emits toxic fumes including CO and COu2082.
Protective Equipment: Firefighters must wear SCBA and structural protective gear.
Accidental Release Measures
Emergency Precautions: Wear full protective clothing. Evacuate unnecessary personnel. Increase ventilation. Avoid walking through spill. Prevent product entering drains or waterways. Notify EPA or local Waste Management.
Clean-up: Absorb with sand or soil. Avoid sawdust or cellulose. Collect into labelled sealed containers. Flush residue with plenty of water. Hold contaminated water for disposal.
Handling & Storage
Handling: Wash thoroughly after handling. Natural ventilation adequate. Avoid contact with eyes, skin, clothing. Keep container tightly closed. Wash hands before eating or smoking. Wash contaminated clothing before reuse. Do not dispose into sewers or waterways.
Storage: Store tightly closed and locked up. Store in cool, dry, well-ventilated area away from incompatible substances. Check regularly for leaks.
Exposure Controls / Personal Protection
Exposure Standards: None established.
Biological Limits: None established.
Engineering Controls: Local exhaust recommended but not mandatory. Provide mechanical ventilation for confined spaces.
PPE:
- Respiratory: Half face mask with A-type filter if required.
- Eye: Safety glasses or face shield.
- Skin: Long sleeves, trousers/coveralls, safety boots, chemical resistant gloves.
Physical & Chemical Properties
Appearance: Colorless
Physical State: Liquid
Odour: Odourless
pH: 8.0u20139.0
Melting/Freezing Point: Not available
Boiling Point: >100u00b0C
Solubility: Soluble in water
Specific Gravity: 1.0u20131.1
Vapour Density: Not available
Vapour Pressure: Not available
Ignition Point: Not available
Flash Point: Not available
Viscosity: Low
% Volatilities: Not available
Decomposition Temperature: Not available
Stability & Reactivity
Chemical Stability: Stable at room temperature and pressure.
Conditions to Avoid: None known.
Incompatible Materials: Strong oxidizers and acids.
Hazardous Decomposition: May generate carbon monoxide when burning.
Toxicological Information
No adverse health effects expected if handled as directed.
Ingestion: May cause headaches, nausea, dizziness, tracheal burning.
Eye Contact: Irritating; pain and conjunctival swelling.
Skin Contact: May be irritating.
Inhalation: May irritate respiratory tract. Prolonged exposure may cause neurological symptoms.
Toxicological Data:
- Quaternary Ammonium Chloride LD50 (Rat): 1420 mg/kg
- Quaternary Ammonium Chloride LD50 (Mouse): 150 mg/kg
Ecological Information
Data: No product-specific ecological data.
Environmental Precautions: Avoid contaminating waterways.
Persistence/Degradability: Biodegradable.
Ecotoxicity (Quaternary Ammonium Chloride):
- LC50 fathead minnow: 0.28 mg/L (96 hr)
- EC50 daphnia magna: 0.006 mg/L (48 hr)
Disposal Considerations
Empty packaging should be taken for recycling, recovery, or disposal through a licensed contractor. Follow national and local authority requirements.
Transport Information
Road & Rail: Not classified as Dangerous Goods.
Marine: Not classified as Dangerous Goods.
Air: Not classified as Dangerous Goods.
Shipping Name: Not Applicable
Hazard Class: Not Applicable
UN Number: Not Applicable
Packing Group: Not Applicable
Hazchem Code: Not Applicable
Regulatory Information
HSNO Approval No: Not Applicable
Group Standard: Not Applicable
HSNO Classification: Not Applicable
Other Information
Poison Centre: 0800 764 766
Emergency Services: 111
Envirochem: +64 9 262 0800
Information provided in good faith; accuracy not guaranteed. Users must test for suitability. No liability accepted for misuse. Dispose according to local regulations.
Related products
Explore complementary products curated to pair with what you are viewing.
Need tailored guidance?
Talk with a Chemlube specialist to fast-track your product quote.
Share application requirements, compliance needs, or volume goals and we’ll match you with the right formulation partner.

