Sanifoam is a high‑performance commercial cleaning solution designed for reliable results in demanding environments. Formulated for professional use, it delivers effective cleaning action across a wide range of surfaces and applications. This product supports routine maintenance as well as intensive cleaning tasks, providing consistent performance, ease of use, and dependable results. Its versatility makes it suitable for industrial, commercial, and facility‑care settings, helping users maintain clean, safe, and well‑presented surfaces. Developed with efficiency and practicality in mind, Sanifoam ensures optimal outcomes with minimal effort, making it an essential choice for organisations seeking professional‑grade cleaning performance.
Product & Company Identification
Product Name: Sanifoam
Recommended use: High Foaming Combination Cleaner and Sanitizer.
Company Details:
Envirochem International (NZ) Ltd
41 Angle Street, Onehunga
Auckland, New Zealand
Telephone: +64 9 262 0800
Emergency Telephone: National Poison Information Centre 0800 764 766
Date of Preparation: 01/06/2017
Hazard Identification
HSNO Hazard Classification: 6.1E, 8.1A, 8.2C, 8.3A, 9.1B
Hazard Statements:
- May be corrosive to metals.
- May be harmful if swallowed.
- May be harmful in contact with skin.
- Causes severe skin burns and eye damage.
- Toxic to aquatic life with long lasting effects.
Prevention Statements:
- Keep out of reach of children.
- Read label before use.
- Read Safety Data Sheet before use.
- Keep in original container.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Wash thoroughly after handling.
- Avoid release to environment.
- Do not eat, drink or smoke when using product.
- Wear protective gloves/clothing and eye/face protection.
Response Statements:
- If medical advice is needed, have product container or label at hand.
- Immediately call a POISON CENTER or doctor/physician.
- Call a POISON CENTER or doctor/physician if you feel unwell.
- Do NOT induce vomiting.
- Wash contaminated clothing before re-use.
- Absorb spillage to prevent material damage.
- Collect spillage.
- IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
- IF ON SKIN (or hair): Remove contaminated clothing. Rinse skin with water/shower.
- IF INHALED: Move to fresh air and keep at rest.
- IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do so; continue rinsing.
Storage:
- Store locked up.
- Store in corrosive resistant container with resistant inner liner.
Disposal: Disposal should be through qualified contractor.
Composition / Information on Ingredients
| Ingredient | CAS # | Concentration % |
|---|---|---|
| Sodium Hydroxide | 1310-73-2 | <15.0 |
| Sodium Hypochlorite | 7689-52-9 | <30.0 |
| Non-Ionic Surfactant | - | 10.0-20.0 |
| Other ingredients (Non-Hazardous) | 7732-81-5 | Balance |
First Aid Measures
Ingestion: Rinse mouth. Do not induce vomiting. Give water to drink. Do not give anything by mouth to an unconscious person. Seek immediate medical aid.
Eye Contact: Flush eyes with water for at least 15 minutes while holding eyelids open. Seek medical attention.
Skin Contact: Remove contaminated clothing. Wash with water and soap.
Inhalation: Move patient to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention.
Fire Fighting Measures
Extinguishing Media: Dry chemical powder, foam, polymer foam, water spray or fog. Water may be ineffective but can control heat.
Hazards from combustion: Not combustible. Residuals may burn producing CO and COu2082.
Protective equipment: Firefighters should wear SCBA and protective gear.
Accidental Release Measures
Emergency precautions: Wear protective clothing; evacuate unnecessary personnel; increase ventilation; avoid slipping; prevent entry to drains.
Clean-up:
- Absorb using sand or soil; avoid sawdust or cellulose.
- Place into labelled sealed containers.
- Flush spill site with water.
- Hold contaminated water for disposal.
Handling & Storage
Handling: Wash after handling. Use in well-ventilated area. Avoid contact with skin, eyes, clothing. Empty containers may retain residue. Do not dispose into waterways.
Storage: Containers must be vented to release pressure. Store cool, dry, well-ventilated. Keep sealed and check for leaks.
Exposure Controls / Personal Protection
Exposure limits: None established.
Engineering controls: Use local exhaust ventilation. Use explosion-proof ventilation equipment.
PPE:
- Respiratory: Half-face A-filter mask if required.
- Eye: Safety glasses or face shield.
- Skin: Long sleeves, trousers, enclosed footwear, chemical-resistant gloves.
Physical & Chemical Properties
Appearance: Clear colourless thick liquid
Odour: Chlorine
pH: 14
Solubility: Soluble in water
Ignition Point: Not applicable
Flash Point: Not applicable
Specific Gravity: 1.09
Vapour Pressure: Not available
Stability & Reactivity
Chemical Stability: Stable at room temperature and pressure.
Conditions to avoid: Heat, sunlight, moisture, high temperatures.
Incompatible materials: Oxidizing agents.
Hazardous decomposition: Carbon monoxide may be released during fire.
Hazardous reactions: Oxidizing agents.
Toxicological Information
No adverse health effects expected with proper handling.
Ingestion: May cause headaches, nausea, dizziness, tracheal burning.
Eye Contact: Irritating with pain and conjunctival swelling.
Skin Contact: Irritating.
Inhalation: Respiratory irritation; prolonged exposure may cause neurological effects.
Toxicological Data:
- Sodium Hypochlorite Oral (mouse) LD50: 5800 mg/kg
- Sodium Hypochlorite Oral (rat) LD50: 8910 mg/kg
Ecological Information
Persistence/Degradability: No data available.
Mobility: No data available. Avoid contamination of waterways.
Disposal Considerations
Empty packaging should be taken to recycling, recovery, or disposal through licensed contractor. Ensure compliance with national and local authorities.
Transport Information
Road/Rail: Dangerous Goods
Marine: Dangerous Goods
Air: Dangerous Goods
Shipping Name: Corrosive Liquid basic inorganic NOS (sodium hydroxides)
Hazard Class: 8
UN Number: UN 3266
Packing Group: III
Hazchem Code: 2R
Regulatory Information
HSNO Approval No: HSR002526
Group Standard: Cleaning Products (corrosive) Group Standard 2006
HSNO Classification: 6.1E, 8.1A, 8.2C, 8.3A, 9.1B
Other Information
Poison Centre: 0800 764 766
Emergency Services: 111
Envirochem: +64 9 262 0800
Information provided in good faith; accuracy not guaranteed. Users must determine suitability for intended purpose. Envirochem accepts no liability for misuse. Follow local regulations for use and disposal.
Related products
Explore complementary products curated to pair with what you are viewing.
Need tailored guidance?
Talk with a Chemlube specialist to fast-track your product quote.
Share application requirements, compliance needs, or volume goals and we’ll match you with the right formulation partner.

