Parts Wash Solvent is a high‑performance commercial cleaning solution designed for reliable results in demanding environments. Formulated for professional use, it delivers effective cleaning action across a wide range of surfaces and applications. This product supports routine maintenance as well as intensive cleaning tasks, providing consistent performance, ease of use, and dependable results. Its versatility makes it suitable for industrial, commercial, and facility‑care settings, helping users maintain clean, safe, and well‑presented surfaces. Developed with efficiency and practicality in mind, Parts Wash Solvent ensures optimal outcomes with minimal effort, making it an essential choice for organisations seeking professional‑grade cleaning performance.
Trade pricing
Pricing is available to approved trade accounts. Sign in to view your rate, or request a quote below.
Sign inProduct & Company Identification
Product name: Parts Wash Solvent
Recommended use: Water Soluble Parts Wash Solvent
Company details:
Envirochem International (NZ) Ltd
41 Angle Street, Onehunga
Auckland, New Zealand
Telephone number: +64 9 262 0800
Emergency telephone number (NZ): National Poison Information Centre 0800 764 766
Date of preparation: 01/06/2017
Hazard Identification
DANGER
HSNO Hazard Classification: 3.1C, 6.1E, 6.3A, 6.9B, 9.1B
Hazard statements:
Highly flammable liquid and vapour.
May be fatal if swallowed and enters airways.
Causes skin irritation.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
Prevention statements:
- Keep out of reach of children.
- Read label before use.
- Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- Keep container tightly closed.
- Ground/bond container and receiving equipment.
- Use explosion-proof electrical/ventilating/lighting equipment.
- Use only non-sparking tools.
- Use only outdoors or in a well-ventilated area.
- Use personal protective equipment as required.
- Wash hands thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Avoid release into environment.
- Take precautionary measures against static discharge.
Response Statements
- IF ON SKIN (or hair): Remove/take off all contaminated clothing. Rinse skin with water/shower.
- In case of fire: Use foam or water mist (Small fires: carbon dioxide, dry chemical, sand).
- Collect spillage.
- If medical advice is needed, have product container or label at hand.
- IF SWALLOWED: Call a POISON CENTRE or doctor/physician if you feel unwell.
- Rinse mouth.
- If skin irritation occurs: Get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing.
- If eye irritation persists: Get medical advice/attention.
- IF INHALED: Remove victim to fresh air and keep at rest in a comfortable position.
- Get medical advice/attention if you feel unwell.
Storage Statement
- Store in a well-ventilated place. Keep container tightly closed.
- Store locked up.
Disposal
Disposal should be through a qualified contractor.
Composition / Information on Ingredients
| Ingredient | CAS # | Concentration % |
|---|---|---|
| Mineral Turpentine | - | >75% |
| Detergents and Wetting Agents | - | <50% |
First Aid Measures
Ingestion: Rinse mouth. Do not induce vomiting. Give water. Never give anything by mouth to an unconscious person. Seek immediate medical aid.
Eye contact: Flush with water for 15 minutes. Seek medical attention.
Skin contact: Remove contaminated clothing. Wash with water and soap.
Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention.
Fire Fighting Measures
Extinguishing media: Dry chemical powder, foam, polymer foam, water spray or fog.
Unsuitable media: Do not use water jet.
Hazards: Emits toxic fumes including carbon monoxide, carbon dioxide, nitrogen oxides.
Specific hazards: Vapour may ignite explosively. Flashback possible. Runoff may create explosion hazard.
Protective equipment: Firefighters must wear full protective gear and SCBA.
Accidental Release Measures
Wear full protective clothing. Remove ignition sources. Evacuate all unnecessary personnel. Increase ventilation. Avoid walking on spilled product. Prevent entry into drains or waterways.
Clean-up:
- Use inert absorbent (sand/soil).
- Avoid sawdust/cellulose.
- Collect saturated material into labelled containers.
- Use non-sparking tools.
- Flush spill area with water.
- Hold contaminated water for disposal.
Handling & Storage
Handling: Use PPE, keep away from ignition sources, maintain ventilation, avoid contact, prevent static buildup, ensure hygiene, and avoid exposure. Pregnant or breastfeeding women should avoid handling.
Storage: Store cool, dry, well-ventilated; sealed; away from ignition, oxidizers, strong acids, foodstuffs. Follow AS1940.
Exposure Controls / Personal Protection
Engineering controls: Use flame-proof local exhaust ventilation. Use explosion-proof equipment.
Respiratory protection: Half-face mask with type A filter.
Eye protection: Safety glasses or face shield.
Skin protection: Long sleeves, long trousers, boots, chemical-resistant gloves.
Physical & Chemical Properties
Appearance: Colourless liquid
Odour: Hydrocarbon
Solubility: Soluble in water
Boiling point: 150u2013193u00b0C
Flash point: 36.5u00b0C
Vapour density: >1 (air=1)
pH: Not applicable
Decomposition temp: Not available
Melting point: Not available
Ignition point: Not available
Vapour pressure: Not available
Evaporation rate: Not available
Partition coefficient: Not available
Density: Not available
Stability & Reactivity
Chemical stability: Stable under normal conditions.
Conditions to avoid: Heat, open flame, ignition sources.
Incompatible materials: Strong oxidizing agents.
Hazardous decomposition: Organic compounds, COu2082, CO.
Hazardous reactions: Reacts with incompatible materials.
Toxicological Information
Ingestion: Aspiration risk; may cause headaches, nausea, dizziness, tracheal burning.
Eyes: Causes serious irritation, tearing, redness, blurred vision.
Skin: Causes irritation, redness, itching, swelling; repeated exposure may cause dermatitis.
Inhalation: Irritating; prolonged exposure may cause neurological symptoms, hallucinations, unconsciousness.
Ecological Information
Persistence/degradability: No information available.
Mobility: No information available.
Bioaccumulative potential: No information available.
Other adverse effects: Unlikely to pose hazard due to high loss rate from solution.
Environmental protection: Prevent discharge into waterways or drains.
Disposal Considerations
Dispose of waste according to local/national regulations. Packaging may still contain flammable vapours. Do not landfill, sewer, or discharge into waterways. Product can be burned in appropriate equipment.
Transport Information
Road/Rail: Dangerous Goods
Marine: Dangerous Goods
Air: Dangerous Goods
Shipping name: Flammable Liquid N.O.S.
Hazard class: 3
Subsidiary risk: 9
UN number: UN 1993
Packing group: III
Hazchem code: 3(Y)E
Regulatory Information
HSNO Approval No: HSR002528
Group Standard: Cleaning Products (Flammable) Group Standard 2006
HSNO Classification: 3.1C, 6.1E, 6.3B, 6.4A, 6.9B, 9.1B
Other Information
NZ Poison Centre: 0800 764 766
Emergency Services: 111
Company: +64 9 262 0800
Information is provided in good faith but without warranty. Users must determine suitability. Envirochem is not liable for misuse or reliance. Follow local regulations.
Related products
Explore complementary products curated to pair with what you are viewing.
Need tailored guidance?
Talk with a Chemlube specialist to fast-track your product quote.
Share application requirements, compliance needs, or volume goals and we’ll match you with the right formulation partner.

